Ss-cycle Closed Loop Oxygen Sensor Kit for Delphi Style S&a User Manual download pdf (Page 6)

13- Remove the socket plugs in terminal positions #8 and #23. See Picture 10, below.

14- Using a Sealed Electrical Tap from the supplied hardware kit, open the cover and position it over the wire coming out of pin #26 (black with

a white stripe). Then slide the black wire with a white stripe from the S&S® harness into the secondary connection position. See Picture 11,

below.

15- Use a pair of pliers to rmly press the metal connector into place over both wires. See Picture 12, below.

NOTE: You can put a small amount of pressure on the connector as you position the wires to make sure they are in the correct position. Once the connector

is pressed in, close the blue plastic cover and listen for a click to conrm it is seated.

Picture 10

Picture 11

Picture 12

1 2 3 4 5 6 7 8

S&S 1
Cycle, Inc 1
17, below left 8
Picture 17 Picture 18 8

Comments to this Manuals

No comments

Ss-cycle Closed Loop Oxygen Sensor Kit for Delphi Style S&a User Manual Page 6

Comments to this Manuals

Related products and manuals for For motorcycles Ss-cycle Closed Loop Oxygen Sensor Kit for Delphi Style S&a